(Case of 10 Boxes) Ejendals Tegera 849 Disposable Nitrile Gloves

£94.99 Ex. VAT

Excellent puncture resistance compared to similar disposable gloves Great fingertip sensitivity for fine handling tasks Non-powdered insides for reduced skin irritation Each box contains 50 gloves
SKU: N/A Categories: ,

Ejendals Tegera 849 Disposable Nitrile Gloves

Working with chemical requires specially designed gloves that can protect your hands from even the most dangerous acids. The Ejendals Tegera 849 Disposable Nitrile Gloves provide splash protection against chemicals and have improved puncture resistance when compared to similar disposable gloves.

Key Information

  • Glove Code: 849
  • EN 388:2003 Rating: 1001
  • EN 374 – 2
  • EN 374 – 3
  • EN 420:2003
  • Size Range: 7 – 12
  • Supplied as a box of 50 gloves

Resistance of the Ejendals 849 Disposable Nitrile Gloves

The Ejendals Tegera 849 Disposable Nitrile Gloves have been tested in accordance with EU standards to ensure high levels of performance. Please find the results below:

EN 388

PROPERTY RESISTANCE LEVEL
Abrasion Resistance Level 1
Cut Resistance Level 0
Tear Resistance Level 0
Puncture Resistance Level 1

EN 374 – 2

EN374-2 resistance to penetration by micro-organisms.

EN 374 – 3

EN374-3 Resistance to chemical hazards (permeation).

Uses of the Tegera 849 Disposable Nitrile Gloves

The Tegera 849 Disposable Nitrile Gloves are designed for use in a range of environments, such as:

  • Chemical risk environments
  • Corrosive environments
  • Dirty environments
  • Environments hazardous to health
  • Harsh environments
  • Microbiological risk environments
  • Moist environments
  • Oil and greasy environments
  • Wet environments

This makes them suitable for the following applications:

  • Assembly
  • Care work
  • Chemical work/technology
  • Cleaning
  • Food handling
  • Food processing
  • Healthcare
  • Hotels, restaurants and cafes
  • HVAC (Heating, ventilation and air conditioning) installation
  • Kitchen work
  • Laboratory work
  • Oil and gas
  • Paint line work
  • Painting
  • Petrochemical industry
  • Security and police work
  • Service work

The 849 Disposable Nitrile Gloves are designated Category III gloves, which means that they have been designed to protect against the highest levels of risk, such as highly corrosive acids. Gloves in this category are of complex design and suitable for irreversible or mortal risks.

Features of the Ejendals Tegera 849 Disposable Nitrile Gloves

  • Excellent puncture resistance when compared to similar disposable gloves
  • Great fingertip sensitivity for fine handling tasks
  • Supplied in an extra long design with non-powdered insides for reduced skin irritation
  • Provide protection against:
    • Contact with chemicals
    • Contact with dirt
    • Contact with moisture
    • Corrosive injuries

Sizing of the Ejendals 849 Nitrile Gloves

The Ejendals Tegera 849 Disposable Gloves are available in six sizes that should suit the hands of most users. Please measure the circumference of your hand around the knuckles (excluding the thumb) with your hand open and your fingers together, and the length of your hand from the tip of your middle finger to your wrist.

Indications of Where to Measure Your Hand

SIZE CIRCUMFERENCE (MM) LENGTH (MM)
Size 7 178mm 171mm
Size 8 203mm 182mm
Size 9 229mm 192mm
Size 10 254mm 204mm
Size 11 279mm 215mm
Size 12 Over 279mm Over 215mm

Materials of the Ejendals Tegera 849

  • Material: Nitrile
  • Thickness: 0.19mm
  • Inside: Non-powdered
Glove Sizes

7, 8, 9, 10, 11, 12

Shopping Cart
Scroll to Top